Welcome to our new website which has been carefully developed to assist you finding the solution to your connection requirement.
New features include the Girder Clamp Configurator, Hollo-Bolt Selector and BIM-compatible CAD files. As the website has been completely rebuilt, users of our old website will need to re-register to access these great features. We apologise for any inconvenience and hope you are pleased with the improvements this new website presents.
We value your feedback and please share your comments or suggestions by emailing email@example.com
Adjustable flange clamp used to connect parallel running steel sections with flanges of the same width. Suitable only for flat flanges and light tensile loadings.
The Type F9 girder clamp is used to achieve a fast steelwork fixing connection between two steel beams or other steel sections which run parallel with each other and where the flanges are of the same width. The clamp can be used with bolts or threaded rod and does not require a location plate making it a simple and cost effective solution. Suitable for use only on parallel flanges and applications with low tensile loadings. Manufactured from malleable iron and available with a hot dip galvanised or zinc plated finish to provide high performance and anti-corrosion protection.
Features & Benefits
Durability and corrosion protection:
|Corrosivity Class||Galvanised Steel||Electroplated Steel|
|C1||More than 50 years||More than 20 years|
|C2||More than 50 years||More than 5 years|
|C3||More than 20 years||Not suitable|
For C4 and C5 corrosion categories contact us.
|Product Code||Safe Working Loads||Dimensions|
|with Bolt||without Bolt||Bolt 8.8 Z||Tensile / 1 Bolt (FOS 5:1)||Tightening Torque*||Clamping Range V||Y||J||X||Width|
|F910NC||F910NB||M10||2.0||20||19 - 42||25||13||19||24|
|F912NC||F912NB||M12||2.8||39||26 - 60||35||17||24||30|
|F916NC||F916NB||M16||5.6||93||29 - 69||43||21||28||35|
|F920NC||F920NB||M20||8.4||177||32 - 82||51||25||35||44|
|F924NCHDG1)||F924NBHDG1)||M24||14.0||235||45 - 95||76||38||55||63|
1) Available in hot dip galvanised only.
* Torque figures based on bolts / setscrews in an unlubricated condition.
For Characteristic Resistances when designing a connection to Eurocode 3, please refer to DoP No.010
Faster to Install
No drilling or welding!
Reasons to choose Lindapter
Save time and money
Clamping two steel sections together avoids time-consuming welding or conventional drilling and bolting.
On-site drilling and welding is avoided, removing the need for hot work permits and encouraging safer site conditions.
Lindapter clamps are manufactured from high strength materials to resist high load requirements and harsh environments.
Industry leading approvals
Lindapter has earned a reputation synonymous with safety and reliability, gaining multiple independent approvals.
Quickly align steel sections by sliding the section into the correct position before tightening the Girder Clamp to complete the installation.
Free connection design
Lindapter’s experienced Engineers can design a bespoke connection based on your specific requirements free of charge.