Lindapter Girder Clamps provided a solution for securing diesel engines onto vehicle trailers.
Location: Staudt, Germany
Product: Type AF Girder Clamp
Client: Maschinenbau Cernota GmbH & Co. KG
For almost 20 years Maschinenbau Cernota has been repairing and maintaining machines and equipment in a wide range of manufacturing industries such as food, automotive, ceramics, glass and wood.
In order to diversify and concentrate on specialist cleaning vehicles and road marking removal technology they set up a new company called Traffic-Lines.
Traffic-Lines were designing a bespoke high-pressure water blasting system to remove rubber abrasion from airport runways. The machine was going to be fitted to the front of a vehicle but needed its own diesel engine to drive the water circulation and provide the necessary pressure. A safe and secure method of connecting the heavy diesel engine to an existing trailer frame was required.
Lindapter Type AF high slip resistance girder clamps in a two-bolt connection were specified to connect special top hat steel profiles to the existing trailer frame. This would provide a sub frame suitable for mounting the diesel engine and associated pipework and equipment onto. A hot dip galvanised (HDG) finish was also specified to provide a high level of corrosion protection.
The top hat steel profiles were fixed at right angles across the width of the existing trailer frame with four connections each one made up of two, size M16, Type AF girder clamps and a location plate. Installation was quick and easy as each bolt is simply inserted through the clamp and into the pre-drilled holes of the top hat steel profile and location plate. A washer and nut are then installed and nut tightened with a torque wrench while the recess in the clamp holds the bolt captive.
Lindapter Type AF Girder Clamps provided a drilling and weld free connection with high load capacities. The connections are approved by the TÜV and in live tests proved they were capable of securing the diesel engine in place during full braking. The first vehicle was successfully delivered to Cologne-Bonn Airport in the summer of 2019.
Want to find out more about this product?
Faster to Install
No drilling or welding!
Reasons to choose Lindapter
Save time and money
Clamping two steel sections together avoids time-consuming welding or conventional drilling and bolting.
On-site drilling and welding is avoided, removing the need for hot work permits and encouraging safer site conditions.
Lindapter clamps are manufactured from high strength materials to resist high load requirements and harsh environments.
Industry leading approvals
Lindapter has earned a reputation synonymous with safety and reliability, gaining multiple independent approvals.
Quickly align steel sections by sliding the section into the correct position before tightening the Girder Clamp to complete the installation.
Free connection design
Lindapter’s experienced Engineers can design a bespoke connection based on your specific requirements free of charge.