January 2021 Update
Lindapter transferred its European Technical Assessments (ETAs) from the UK to a Technical Assessment Body (TAB) based in the EU. As part of this process, it was necessary to update Lindapter’s ETAs, Declaration or Performance documents (DoPs) and Factory Production Control certificates. There have been no changes to any Lindapter CE Marked product specifications or Characteristic Resistances. The updated documents are merely an administrative requirement to ensure the continued validity of Lindapter’s CE Marked certification.
View the latest DoPs and Certificates
Lindapter CE Marked products create additional security for Engineers, Specifiers and Contractors as product performance is independently tested and confirmed to meet an internationally recognised standard, in full compliance with the Construction Product Regulation 305/2011/EU.
Each of Lindapter’s CE marked products conforms to a European Technical Assessment (ETA) and the corresponding Declaration of Performance (DoP) lists Characteristic Resistances for use when designing connections to Eurocode 3.
Lindapter further demonstrates its commitment to quality and transparency of product performance, by increasing the number of independent accreditations to include CE Marking. Lindapter commissioned a Notified Body to carry out an independent and thorough assessment of its Factory Production Control System and product performance to confirm that Lindapter meets the requirements of the Construction Products Regulation.
HOLLO-BOLT - ETA 20/0917
(previously ETA 10/0416)
LINDIBOLT - ETA 20/0916
(previously ETA 11/0199)
HSR & GIRDER CLAMPS - ETA 20/0918
(previously ETA 15/0537)
ADJUSTABLE CLAMPS - ETA 20/0921
FLOOR FIXINGS - ETA 20/0919
(previously ETA 15/0538)
DECKING FIXINGS - ETA 20/0920
(previously ETA 18/0512)
For use when designing connections to Eurocode 3 only
Get in touch with our technical support team
Faster to Install
No drilling or welding!
Reasons to choose Lindapter
Save time and money
Clamping two steel sections together avoids time-consuming welding or conventional drilling and bolting.
On-site drilling and welding is avoided, removing the need for hot work permits and encouraging safer site conditions.
Lindapter clamps are manufactured from high strength materials to resist high load requirements and harsh environments.
Industry leading approvals
Lindapter has earned a reputation synonymous with safety and reliability, gaining multiple independent approvals.
Quickly align steel sections by sliding the section into the correct position before tightening the Girder Clamp to complete the installation.
Free connection design
Lindapter’s experienced Engineers can design a bespoke connection based on your specific requirements free of charge.