You are here: Home > Assemblies
Assembly Selector

Lindapter Launches New Catalog

Lindapter, the pioneer of steel clamping systems has released a new comprehensive guide for designing steel connections, featuring...
More [+]

New Lindapter Catalog Launched at NASCC Show

Lindapter launched its new catalog and unveiled its new display at its largest ever presence at the NASCC 2017 tradeshow    ...
More [+]

Project of the Month

 Lindapter's Type AF clamps were used to secure a subsea platformAtlantis Resources Limited is pioneering the development of tidal current power...
More [+]

Assemblies

GC001-1

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC sections at 90 degrees to each other.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs view assembly »

GC001-3

Lindapter Girder Clamp assembly suitable for securing C / S / MC beams / sections with 8 degree sloping flanges (or greater) at 90 degrees to W / HP sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC001-4

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC sections in situations which require angular crossovers.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs view assembly »

GC001-5

M16 Lindapter Flush Clamp assembly suitable for securing W / HP / S / C / MC sections together without the need for a location plate between the flanges.

Angular cross over range 45 to 90 degrees (dependant section widths).

Tensile capacity 6,745lbs.

Frictional capacity 1,686lbs. view assembly »

GC001-6

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees below fabriacted sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC001-7

Lindapter high friction Girder Clamp assembly suitable for securing W / HP / S /C / MC beams at 90 degrees below fabriacted sections.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 56,200lbs.

Frictional capacity range 1,530lbs to 15,736lbs. view assembly »

GC001-8

Lindapter high friction Girder Clamp assembly suitable for securing W / HP / S /C / MC sections at 90 degrees to each other.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 56,200lbs.

Frictional capacity range 1,530lbs to 15,736lbs. view assembly »

GC001-9

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees below fabricated sections. The assembly uses adjustable clamps to increase the reach on to steel flange.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC001-12

Lindapter Girder Clamp assembly suitable for securing C / S / MC beams / sections with 8 degree sloping flanges (or greater) at 90 degrees to W / HP sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC001-13

Lindapter Girder Clamp assembly suitable for securing a pre-drilled W / HP section at 90 degrees to another W / HP section.

Available in sizes 1/2" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC001-14

Lindapter Girder Clamp assembly suitable for securing C / S / MC beams / sections with 8 degree sloping flanges (or greater)to W / HP sections in situations that require angular crossovers

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC002-1

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC sections of same width parallel and below each other.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC002-2

Lindapter Girder Clamp assembly suitable for securing End plates to W / HP / S / C / MC sections of same width.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs. view assembly »

GC002-3

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC sections with different widths parallel and below each other.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC002-4

Lindapter arrangement suitable for securing W / HP / S / C / MC sections together in parallel / unequal width conditions.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs view assembly »

GC003-1

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees to each other with inclined top section.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC003-2

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees to each other with inclined top section. This type of arrangement with a fabricated stool is suitable for conditions where a large gap between the sections is required.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC003-3

Lindapter high friction arrangement for securing end plate to inclined section.

Available in sizes ½" to 1"

Tensile capacity range 7,644lbs to 56,200lbs.

Fricional capacity range 1,530lbs to 15,736lbs. view assembly »

GC003-4

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees to each other with inclined top section. This type of arrangement with a fabricated stool is suitable for conditions where a large gap between the sections is required.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 56,200lbs.

Frictional capacity range 1,530lbs to 15,736lbs. view assembly »

GC004-1

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees to each other with fixed drop between. This type of arrangement with a fabricated stool is suitable for conditions where a large gap between the sections is required.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC004-2

Lindapter Girder Clamp assembly suitable for securing W / HP / M beams at 90 degrees to each other with adjustable drop between.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

view assembly »

GC004-3

Lindapter high friction Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees to each other with adjustable drop between.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 56,200lbs. view assembly »

GC004-4

Lindapter arrangement suitable for securing End Plates to S / C / MC beams / sections with 8 degree sloping flanges (or greater).

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC004-5

Lindapter high friction arrangement for securing end plate to W / HP / S / C / MC sections.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 56,200lbs.

Fricional capacity range 1,530lbs to 15,736lbs. view assembly »

SC type 4-6

Lindapter Girder Clamp Assembly suitable for securing W / HP / M beams at 90 degrees to each other with adjustable gap between.

Available in sizes 1/2" to 1".

Tensile capacity range 5,200 lbs to 17,715 lbs. view assembly »

GC005-1

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams which are located on the inside flange of a parallel section.

Available in sizes ½" to 1".

Suitable for positional conditions. view assembly »

GC005-2

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams which are located on the both flanges of a parallel section.

Available in sizes ½" to 1".

Suitable for positional conditions. view assembly »

GC006-1

Lindapter Girder Clamp assembly suitable for securing channels (toes down) at 90 degrees below W / HP / S / C / MC sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 13,264lbs. view assembly »

GC006-3

Lindapter Girder Clamp assembly suitable for securing a channel at 90 degrees below W / HP / S / C / MC sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs. view assembly »

GC006-4

Lindapter Girder Clamp assembly suitable for securing channel to channel crossing at 90 degrees to each other.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 23,600lbs.

Frictional capacity range 1,530lbs to 7,194lbs. view assembly »

GC006-5

Lindapter Girder Clamp assembly suitable for securing channel to channel crossing at 90 degrees to each other without the need for a location plate.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 23,600lbs.

Frictional capacity range 1,530lbs to 7,194lbs. view assembly »

GC007-1

Lindapter Girder Clamp assembly suitable for locating a channel on top of existing W / HP / S / C MC sections.

Available in sizes ½" to 1".

Suitable for position conditions. view assembly »

GC007-2

Lindapter Girder Clamp assembly suitable for securing a channel at 90 degrees above W / HP / S / C / MC sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs. view assembly »

GC008-2

Lindapter Girder Clamp assembly suitable for securing Angle at 90 degrees below W / HP / S / C / MC sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 13,264lbs.

Frictional capacity range 315lbs to 1,350lbs. view assembly »

GC008-3

Lindapter Girder Clamp assembly suitable for securing Angle to Channel crossing at 90 degrees.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 23,600lbs.

Frictional capacity range 1,530lbs to 7,194lbs. view assembly »

GC008-4

Lindapter Girder Clamp assembly suitable for securing Angle to Angle crossing at 90 degrees.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 23,600lbs.

Frictional capacity range 1,530lbs to 7,194lbs. view assembly »

GC009-1

Lindapter 6 bolt high friction arrangement for securing end plate to vertical column section.

Available in sizes ½" to 1"

Tensile capacity range 11,465lbs to 84,300lbs.

Fricional capacity range 2,293lbs to 23,605lbs.

. view assembly »

GC009-2

Lindapter high friction arrangement for securing end plate to vertical column section.

Available in sizes ½" to 1"

Tensile capacity range 7,644lbs to 56,200lbs.

Fricional capacity range 1,530lbs to 15,736lbs. view assembly »

GC010-1

Lindapter Girder Clamp assembly suitable for securing a timber joist to the underside of a W beam crossing at 90 degrees to each other.

Available in sizes 1/2" to 1".

Tensile capacity range 2600 lbs to 8860 lbs.

Frictional capacity range 157 lbs to 1012 lbs. view assembly »

GC011-1

Lindapter Girder Clamp assembly suitable for securing a steel beam to the underside of a concrete soffit.

Available in sizes 1/2" to 1".

Tensile capacity range 5205 lbs to 17679 lbs.

Frictional capacity range 315 lbs to 2023 lbs.

Loads subject to capacity of anchor fixings and spacing (anchor bolts not supplied by Lindapter). view assembly »

GC011-2

Lindapter Girder Clamp assembly suitable for securing a concrete beam to a steel beam crossing at 90 degrees to each other.

Available in sizes 1/2" to 1".

Tensile capacity range 5205 lbs to 17679 lbs.

Frictional capacity range 315 lbs to 2023 lbs. view assembly »

page 1
 
2
 
3
 
4
 
5
 
6
 
7
 
8
 
9
 
10
 
11
 
12
 
13
 
14
 
15
 
16
 
17
 
18
 
19
 
20
 
21
 
TEXT SIZE: A/A/A