You are here: Home > Assemblies
Assembly Selector

Latest News

Hollo-Bolt was used on Roofs due to Wind Load Capacities

Lindapter's Hollo-Bolt was specified for securing the new platform roofs during the station refurbishment at Berlin Ostkreuz, the busiest interchange...
More [+]

Hollo-Bolt Flush Fit was used to Strengthen a Factory Floor

Sherwin Williams needed to reinforce its chequer plate floor to allow forklift truck drivers to transport stock throughout the manufacturing facility...
More [+]

Lindapter Specified for Eiffel Tower Projects

Since its opening in 1889, the Eiffel Tower has welcomed an ever-growing amount of tourists. In recent years, contractors have restored and adapted...
More [+]

Assemblies

GC001-1

Lindapter Girder Clamp assembly suitable for securing UB / UC / RSJ sections at 90 degrees to each other.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9 kN view assembly »

GC001-3

Lindapter Girder Clamp assembly suitable for securing RSJ beams / sections with 8 degree sloping flanges (or greater) at 90 degrees to UB / UC sections.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9 kN. view assembly »

GC001-12

Lindapter Girder Clamp assembly suitable for securing RSJ beams / sections with 8 degree sloping flanges (or greater) at 90 degrees to UB / UC sections.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9 kN. view assembly »

GC001-4

Lindapter Girder Clamp assembly suitable for securing UB / UC / RSJ sections in situations which require angular crossovers.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9 kN view assembly »

GC001-5

M16 Lindapter Flush Clamp assembly suitable for securing UB / UC / RSJ sections together without the need for a location plate between the flanges.

Angular cross over range 45 to 90 degrees (dependant section widths).

Tensile capacity 30 kN

Frictional capacity 7.5 kN view assembly »

GC001-6

Lindapter Girder Clamp assembly suitable for securing UB / UC / RSJ beams at 90 degrees below fabriacted sections.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9 kN. view assembly »

GC001-7

Lindapter high friction Girder Clamp assembly suitable for securing UB / UC / RSJ beams at 90 degrees below fabriacted sections.

Available in sizes M12 to M24.

Tensile capacity range 34 kN to 250 kN.

Frictional capacity range 6.8 kN to 70 kN. view assembly »

GC001-8

Lindapter high friction Girder Clamp assembly suitable for securing UB / UC / RSJ sections at 90 degrees to each other.

Available in sizes M12 to M24.

Tensile capacity range 34 kN to 250 kN.

Frictional capacity range 6.8 kN to 70 kN view assembly »

GC001-13

Lindapter Girder Clamp assembly suitable for securing a pre-drilled UB / UC section at 90 degrees to another UB / UC / RSJ section.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9 kN view assembly »

GC002-1

Lindapter Girder Clamp assembly suitable for securing UB / UC / RSJ sections of same width parallel and below each other.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9 kN view assembly »

GC002-2

Lindapter Girder Clamp assembly suitable for securing End plates to UB / UC / RSJ sections of same width.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN. view assembly »

GC002-3

Lindapter Girder Clamp assembly suitable for securing UB / UC / RSJ sections with different widths parallel and below each other.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9 kN. view assembly »

GC002-4

Lindapter arrangement suitable for securing UB / UC / RSJ sections together in parallel / unequal width conditions.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9 kN view assembly »

GC003-1

Lindapter Girder Clamp assembly suitable for securing UB / UC / RSJ beams at 90 degrees to each other with inclined top section.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9.0 kN view assembly »

GC003-2

Lindapter Girder Clamp assembly suitable for securing UB / UC / RSJ beams at 90 degrees to each other with inclined top section. This type of arrangement with a fabricated stool is suitable for conditions where a large gap between the sections is required.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9.0 kN view assembly »

GC003-3

Lindapter high friction arrangement for securing end plate to inclined section.

Available in sizes M12 to M24

Tensile capacity range 34 kN to 250 kN.

Fricional capacity range 6.8 kN to 70 kN. view assembly »

GC003-4

Lindapter Girder Clamp assembly suitable for securing UB / UC / RSJ beams at 90 degrees to each other with inclined top section. This type of arrangement with a fabricated stool is suitable for conditions where a large gap between the sections is required.

Available in sizes M12 to M24.

Tensile capacity range 34 kN to 250 kN.

Frictional capacity range 6.8 kN to 70 kN view assembly »

GC004-1

Lindapter Girder Clamp assembly suitable for securing UB / UC / RSJ beams at 90 degrees to each other with fixed drop between. This type of arrangement with a fabricated stool is suitable for conditions where a large gap between the sections is required.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9.0 kN view assembly »

GC004-2

Lindapter Girder Clamp assembly suitable for securing UB / UC / RSJ beams at 90 degrees to each other with adjustable drop between.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

view assembly »

GC004-3

Lindapter high friction Girder Clamp assembly suitable for securing UB / UC / RSJ beams at 90 degrees to each other with adjustable drop between.

Available in sizes M12 to M24.

Tensile capacity range 34 kN to 250 kN. view assembly »

GC004-4

Lindapter arrangement suitable for securing End Plates to RSJ beams / sections with 8 degree sloping flanges (or greater).

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9 kN view assembly »

GC004-5

Lindapter high friction arrangement for securing end plate to UB / UC / RSJ sections.

Available in sizes M12 to M24

Tensile capacity range 34 kN to 250 kN.

Fricional capacity range 6.8 kN to 70 kN. view assembly »

GC005-1

Lindapter Girder Clamp assembly suitable for securing UB / UC / RSJ beams which are located on the inside flange of a parallel section.

Available in sizes M12 to M24.

Suitable for positional conditions. view assembly »

GC005-2

Lindapter Girder Clamp assembly suitable for securing UB / UC / RSJ beams which are located on the both flanges of a parallel section.

Available in sizes M12 to M24.

Suitable for positional conditions. view assembly »

GC006-1

Lindapter Girder Clamp assembly suitable for securing channels (toes down) at 90 degrees below UB / UC / RSJ sections.

Available in sizes M12 to M20.

Tensile capacity range 23.2 kN to 59 kN. view assembly »

GC006-2

Lindapter Girder Clamp assembly suitable for securing a channel at 90 degrees below UB / UC / RSJ sections.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN. view assembly »

GC006-3

Lindapter Girder Clamp assembly suitable for securing a channel at 90 degrees below UB / UC / RSJ sections.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN. view assembly »

GC006-4

Lindapter Girder Clamp assembly suitable for securing channel to channel crossing at 90 degrees to each other.

Available in sizes M12 to M20.

Tensile capacity range 34 kN to 105 kN.

Frictional capacity range 6.8 kN to 32 kN view assembly »

GC006-5

Lindapter Girder Clamp assembly suitable for securing channel to channel crossing at 90 degrees to each other without the need for a location plate.

Available in sizes M12 to M20.

Tensile capacity range 34 kN to 105 kN.

Frictional capacity range 6.8 kN to 32 kN. view assembly »

GC006-6

Lindapter Girder Clamp assembly suitable for securing a channel at 90 degrees below UB / UC / RSJ sections.

Available in sizes M12 to M24.

Tensile capacity range 11.6 kN to 39.4 kN.

Frictional capacity range 0.7 kN to 4.5 kN. view assembly »

GC007-1

Lindapter Girder Clamp assembly suitable for locating a channel on top of existing UB / UC / RSJ sections.

Available in sizes M12 to M24.

Suitable for position conditions. view assembly »

GC007-2

Lindapter Girder Clamp assembly suitable for securing a channel at 90 degrees above UB / UC / RSJ sections.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN. view assembly »

GC008-2

Lindapter Girder Clamp assembly suitable for securing Angle at 90 degrees below UB / UC / RSJ sections.

Available in sizes M12 to M20.

Tensile capacity range 23.2 kN to 59 kN.

Frictional capacity range 1.4 kN to 6 kN view assembly »

GC008-3

Lindapter Girder Clamp assembly suitable for securing Angle to Channel crossing at 90 degrees.

Available in sizes M12 to M20.

Tensile capacity range 34 kN to 105 kN.

Frictional capacity range 6.8 kN to 32 kN. view assembly »

GC008-4

Lindapter Girder Clamp assembly suitable for securing Angle to Angle crossing at 90 degrees.

Available in sizes M12 to M20.

Tensile capacity range 34 kN to 105 kN.

Frictional capacity range 6.8 kN to 32 kN. view assembly »

GC009-1

Lindapter 6 bolt high friction arrangement for securing end plate to vertical column section.

Available in sizes M12 to M24

Tensile capacity range 51 kN to 375 kN.

Fricional capacity range 10.2 kN to 105 kN.

. view assembly »

GC009-2

Lindapter high friction arrangement for securing end plate to vertical column section.

Available in sizes M12 to M24

Tensile capacity range 34 kN to 250 kN.

Fricional capacity range 6.8 kN to 70 kN. view assembly »

GC010-1

Lindapter Girder Clamp assembly suitable for securing a timber joist to the underside of a steel beam crossing at 90 degrees to each other.

Available in sizes M12 to M24.

Tensile capacity range 11.6 kN to 39.4 kN.

Frictional capacity range 0.7 kN to 4.5 kN. view assembly »

GC011-1

Lindapter Girder Clamp assembly suitable for securing a steel beam to the underside of a concrete soffit.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9.0 kN.

Loads subject to capacity of anchor fixings and spacing (anchor bolts not supplied by Lindapter). view assembly »

GC011-2

Lindapter Girder Clamp assembly suitable for securing a concrete beam to a steel beam crossing at 90 degrees to each other.

Available in sizes M12 to M24.

Tensile capacity range 23.2 kN to 78.8 kN.

Frictional capacity range 1.4 kN to 9.0 kN. view assembly »

page 1
 
2
 
3
 
4
 
5
 
6
 
7
 
8
 
9
 
10
 
11
 
12
 
13
 
14
 
15
 
16
 
17
 
18
 
19
 
20
 
TEXT SIZE: A/ A/ A